Nitrogen gas boosters are typically used to compress nitrogen gas from a low pressure to a high pressure. The specific pressure requirements will vary depending on the application. For example, nitrogen gas may be boosted to a high pressure for use in inerting tanks, purging pipelines, or pressure testing equipment.
The article discusses a specific nitrogen gas booster compressor system that can compress nitrogen gas from 100 to 145 PSIG to a final outlet pressure of 15,000 psi. The outlet flow rate varies depending on the pressure and air drive. Other features of this particular system include a noise reduction paneling and a regulated pressure of 72 psig at the booster inlet.
In addition to the features mentioned above, nitrogen gas booster compressor systems can also include a variety of other features, such as:
- Intercoolers: Intercoolers are heat exchangers that are used to cool the nitrogen gas between stages of compression. This helps to prevent the gas from overheating and decomposing.
- Aftercoolers: Aftercoolers are heat exchangers that are used to cool the nitrogen gas after it has been compressed to its final pressure. This helps to remove moisture from the gas and prevent it from condensing in the system.
- Filters: Filters are used to remove contaminants from the nitrogen gas. This helps to protect the equipment and ensure that the gas is clean and dry.
- Safety relief valves: Safety relief valves are used to protect the system from overpressure. If the pressure in the system exceeds a safe limit, the relief valve will open and release gas to the atmosphere.
Nitrogen gas booster compressor systems are an essential piece of equipment for many industrial applications. They are used to provide a reliable source of high-pressure nitrogen gas for a variety of purposes.